How to apply CarPro Ceriglass

Written Instructions: 
  • Cover the vehicle surfaces around the glass with plastic
  • Shake well
  • Apply small amount on the glass polish pad
  • Work thoroughly on the glass surface one section at a time in overlapping motions.
  • If the product starts to dry apply a spritz of water on the pad to extend the life of the polish (Important during the finishing stage for best finish)
  • Repeat as necessary
  • Rinse the surface with water, dry off with MF, and observe your work.
Note:

Do not dry wipe the dust or residue off of painted surfaces. Wash or clean with plenty of water.

Back to blog