Skip to product information
1 of 2

Detailclub.co.nz

CarPro - Cquartz UK 3.0 Edition w/Reload - 50ml kit - CQUK

CarPro - Cquartz UK 3.0 Edition w/Reload - 50ml kit - CQUK

Regular price $97.00 USD
Regular price Sale price $97.00 USD
Sale Sold out
Kit Contains: 
  • (1) 50ml bottle of CQuartz UK 3.0 (Use 15ml+/- per coat – average size car)
  • (1) 100ml bottle of CarPro Reload Silica Spray
  • (1) 16″ Microfiber Suede Towel
  • (1) CarPro Foam Applicator Block
  • (1) 4″ MF Suede applicators

Description: 

  • Now easy to use in a wide range of temps!
  • Protection and gloss superior to that of competitor “professional coatings” but easy to use for all detailers
  • Extremely high Sio2 Quartz content
  • Deep gloss that lasts!
  • Easy maintenance with “self cleaning” properties (Stays cleaner than other products on the market)
  • Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
  • Repels UV rays, water, oils, dirt, and contaminants

Warning – Always follow the manufacturer’s guidelines for safe use. We always recommend that you work in well-ventilated areas and the use of dustproof face masks with appropriate filters, while using any detailing products and paint protection coatings that contain silica/sio2 that create dust or airborne particles during use.

How to use: 

Written Instructions: 

  • If contamination exists it is recommended that you Iron X and clay your vehicle before polishing.
  • To gain the most from Cquartz it is recommended that your vehicle have all surfaces 100% clean and paint polished to a high level
  • Use CarPro Reflect to achieve an incredible high gloss finish in less time with no fillers
  • Use CarPro Eraser to remove all oils leftover from Reflect – This is critical to ensure durability of CQuartz
Directions: (Use only in good ambient lighting)
  1. Wrap a 4″ mf Suede around the grey side of applicator block
  2. Shake CQuartz UK
  3. Slowly open bottle and drag one line of product across applicator
  4. Spread across paint in a criss cross pattern approximately 2 sq ft at a time depending on conditions
  5. Buff off as soon as it flashes (within 1-5 minutes depending) using a CarPro No Lint Ultra Towel 16″ x 16″
  6. Be sure to remove all excess residue and only then do you move to the next section
  7. Switch out applicators regularly
  8. Apply Reload before 1 hour.  Wait until next day for Reload if you miss the 30-60 minute window
After Tips:
  • Keep surface dry for at least one hour after application (For best results keep dry 24 hours)
  • Gently wipe any water off the surface during the first 24 hours after application
  • Avoid detergents and chemicals for 5 days after application
  • If it is dry and the air is clean outside then you may park the vehicle in direct sun after application to speed the curing
Precautions:
  • Do not apply in direct sun or on hot surface
  • Do not re-use 4″ Suede applicators
  • Do not re-use the towels you used to buff off with on paint
  • Wear hand protection
  • Wear respiratory protection such as painters mask
View full details