1 1

Detailclub.co.nz

CarPro - DLUX - Plastic, Rubber and Alloy Protection - 30ml kit

CarPro - DLUX - Plastic, Rubber and Alloy Protection - 30ml kit

$76.16 NZD
$76.16 NZD
Sale Sold out
Kit Contains: 
  • 1 x CQUARTZ DLUX 30ml.
  • 1 x Orange Foam Block Applicator
  • 4 x Suede MF applicators 4″x4″

Description: 

  • Made from quality high grade organic silane. DLUX is a Silane-based glass coating, DLUX Contains more than 50% pure silica!
  • Restores faded trim to look like new.
  • Lays down a protective film which forms an extremely durable glass coating on top of any substrate it is applied to.
  • We have incorporated a totally different nano composition to bond hard to plastic surface and achieve a thick uniformed layer.
  • Dlux offers a semi permanent chemical bonding to surface pores
  • Very easy to apply with great UV protection, on all exterior substrates.
  • Can be used on textured or smooth plastic
  • DLUX also offers semi permanent protection of aluminum wheels & Plastic finished wheels.
  • On wheels, DLUX will repel dirt and dust with ease & aid in the removal of brake dust.
  • DLUX will leave a glossy finish and is entirely hydrophobic.
  • Heat resistance to 800c+
  • Durability: 12+ months
  • Average use for 4 wheels and plastic trim = 10-15ml.

How to use: 

Warning – Always follow the manufacturer’s guidelines for safe use. We always recommend that you work in well-ventilated areas and the use of dustproof face masks with appropriate filters, while using any detailing products and paint protection coatings that contain silica/sio2 that create dust or airborne particles during use.

  • Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun.)
  • Scrub surface with an all purpose cleaner and or water spot remover, rinse clean, and allow to dry.
  • Use ERASER to remove any residue left by the APC or oil film and wait until the cleaned area is completely dry.
  • Wet the applicator with 5-6 drops of DLUX and spread evenly across the surface.
  • Let cure for 1 minute before buffing.
  • in the case of wheels, apply to full face then buff, then full rear barrel allow 1 minute cure then buff
  • Allow the surface to cure for 1-3 hours without any moisture on its surface.
  • Completely cured with NO rain requires 24 hours.  (Any water marks from rain must be wiped off during first 24Hrs as a precaution)
Cautions
  • Never allow highly alkaline (ph12+) chemicals such as non-diluted all purpose cleaners to sit or dwell on the surface for extended periods.  This may damage the coating.
  • Do not use for other purposes.
  • If it becomes sticky and tough to remove apply more dlux over the top and buff immediately then work in smaller sections after this or omit the 1 minute cure.
  • Keep out of reach of children.
  • Keep away from heat.
  • Do not ingest.
  • Avoid contact from eyes.
  • Wear gloves and face mask during removal

 


 

View full details